Teicoplanin for Injection 200mg Technical Specification:

Product Name:Teicoplanin for Injection 200mg
Brand Name:Teicotaj
Strength:200mg, 400mg
Dosage Form:Lyophilized Powder for Injection (Sterile)
Packing:1 Glass Vial + WFI in a Tray
Route of Administration:For I.M./I.V. use only
Pack Insert/Leaflet:PIL (Patient Information Leaflet), SmPC (Summary Product Characteristics)
Regulatory Documents:COA, MOA, COPP, FSC, Stability Studies, GMP, CTD Dossier
Therapeutic use:Antibacterials, Anti-Infectives, Antibiotic (glycopeptide)
Indication: Teicoplanin is used in the treatment of severe bacterial infections in hospitalized patients. It treats infections of skin & soft tissues, blood, heart, bones and lungs (pneumonia). Teicoplanin is an antibiotic. It kills bacteria by preventing them from forming the bacterial protective covering (cell wall) which is needed for them to survive.
Storage:Store below 25°C (77°F). Protect from light and moisture. Do not freeze.

GENERIC NAME OF THE MEDICINAL PRODUCT:

  • Teicoplanin for Injection 200mg

QUALITATIVE AND QUANTITATIVE COMPOSITION:

  • Teicoplanin for Injection 200mg
    a. Each vial contains:
    Teicoplanin……….200mg
    Excipients…………q.s
    b. This pack also contains:
    One FFS ampule of Sterile Water for Injection BP…….10ml

THERAPEUTIC INDICATIONS:

Teicoplanin is used in the treatment of severe bacterial infections in hospitalized patients. It treats infections of skin & soft tissues, blood, heart, bones and lungs (pneumonia). Teicoplanin is an antibiotic. It kills bacteria by preventing them from forming the bacterial protective covering (cell wall) which is needed for them to survive.

DIRECTION OF USE:

As sterile freeze-dried powder for Reconstitution with Sterile water for Injection 10ml.
Reconstituted solution should be administered in a suitable parental fluid prior to IV Infusion.

Reconstituted solution should be stored under refrigeration and solution stored for longer than 24 hours should be discarded.
Read enclosed leaflet for reconstitution & administration and for further information.

CAUTION & Warning:

CAUTION: After reconstitution do not use in case any foreign particulate matter is observed. Do not use the solution & return for the replacement.

Use only after reading the directions on the pack insert.

Discard unused portion.

FLIP-OFF SEAL IS PROVIDED FOR TAMPER EVIDENCE.

Warning:
-It is dangerous to take this preparation except in accordance with the medical advice.
-Not to be sold by retail without the prescription of a Registered Medical Practitioner.

STORAGE & DOSAGE:

Storage: Store below 25°C (77°F).
Protect from heat and moisture.
Do not freeze.
Keep all medicines out of reach of children.

Dosage:  As directed by the Physician.

Why Taj Pharmaceuticals?

Taj Pharma’s Teicoplanin Injection – the preferred choice for healthcare professionals combating bacterial infections. Our commitment to excellence in quality and efficacy makes us the trusted partner in healthcare. Discover why Teicoplanin Injection from Taj Pharma is the optimal solution for patients’ well-being.

  • Proven Effectiveness: Taj Pharma’s Teicoplanin Injection is renowned for its effectiveness in treating a wide range of bacterial infections. Backed by rigorous research and clinical trials, it consistently delivers results that healthcare providers can rely on.
  • Quality Assurance: We adhere to stringent quality control measures, ensuring that every Teicoplanin Injection vial meets the highest industry standards. Our dedication to quality guarantees the safety and well-being of patients.
  • Expertise and Experience: With decades of experience in pharmaceuticals, Taj Pharma has built a reputation for excellence in healthcare. Our Teicoplanin Injection reflects this expertise, providing healthcare professionals with a powerful tool in their arsenal against infections.
  • Trustworthy Partner: Taj Pharma has earned the trust of healthcare providers worldwide. When you choose our Teicoplanin Injection, you’re partnering with a company that prioritizes patient health and safety above all else.
  • Comprehensive Support: Beyond just providing a product, Taj Pharma offers comprehensive support to healthcare providers. We ensure easy access, clear instructions, and a dedicated team to assist with any inquiries.

Choose Taj Pharma’s Teicoplanin Injection for a reliable, effective, and trusted solution in the fight against bacterial infections. Your patients deserve nothing less.

What is Teicoplanin Injection and its use?

Teicoplanin Injection is a medication that contains teicoplanin as its active ingredient. It belongs to a class of antibiotics known as glycopeptides and is primarily used to treat bacterial infections, particularly those caused by gram-positive bacteria. Here’s some information about Teicoplanin Injection and its uses:

  • Antibacterial Action: Teicoplanin works by inhibiting the growth and spread of bacteria. It is effective against a wide range of gram-positive bacteria, including Staphylococcus aureus (including methicillin-resistant strains, or MRSA), Streptococcus species, and Enterococcus species.
  • Indications: Teicoplanin Injection is commonly used in hospital settings to treat serious infections, such as:
    Skin and Soft Tissue Infections: It can be used to treat severe skin and soft tissue infections caused by susceptible bacteria.
    Bone and Joint Infections: Teicoplanin may be prescribed for bone and joint infections, especially when caused by MRSA or other resistant bacteria.
    Endocarditis: In cases of infective endocarditis (infection of the heart valves or inner lining of the heart), Teicoplanin can be an effective treatment option.
    Respiratory Tract Infections: It may be used in cases of severe respiratory tract infections, including pneumonia, when other antibiotics are not suitable.
  • Hospital-Acquired Infections: Teicoplanin is often employed in hospitals to combat infections that patients may acquire during their stay. This includes infections associated with intravenous catheters, surgical wounds, or other medical procedures.
  • MRSA Infections: Teicoplanin is particularly valuable in treating infections caused by methicillin-resistant Staphylococcus aureus (MRSA), which can be challenging to treat with many other antibiotics.
  • Administration: Teicoplanin is typically administered intravenously (IV) or intramuscularly (IM) by healthcare professionals in a healthcare setting. The dosage and duration of treatment depend on the specific infection being treated, the patient’s condition, and other factors.

It’s crucial to use Teicoplanin Injection under the guidance and supervision of a healthcare provider, as antibiotics should be prescribed judiciously to minimize the development of antibiotic resistance. Additionally, patients should complete the full course of treatment even if their symptoms improve to ensure the infection is completely eradicated.

How does Teicoplanin Injection Work?

Teicoplanin Injection works by inhibiting the growth and spread of bacteria, particularly gram-positive bacteria. Its mechanism of action is similar to that of other glycopeptide antibiotics like vancomycin. Here’s how Teicoplanin exerts its antibacterial effects:

  • Inhibition of Cell Wall Synthesis: Bacterial cells are surrounded by a protective outer layer called the cell wall, which is essential for their structure and integrity. Teicoplanin interferes with the synthesis of the bacterial cell wall by binding to a specific component called peptidoglycan.
  • Blocking Peptidoglycan Formation: Peptidoglycan is a vital component of the bacterial cell wall, providing strength and rigidity to the cell. Teicoplanin binds to the peptidoglycan precursors and prevents their incorporation into the growing cell wall.
  • Disruption of Cell Wall Function: By inhibiting the formation of peptidoglycan, Teicoplanin weakens the bacterial cell wall. This results in structural instability and a compromised cell wall, making the bacteria susceptible to lysis (breaking apart) and death.
  • Bactericidal Action: Teicoplanin’s interference with cell wall synthesis ultimately leads to bacterial cell death. It has a bactericidal (killing) effect on a wide range of gram-positive bacteria, including Staphylococcus species, Streptococcus species, and Enterococcus species.
  • Specificity for Gram-Positive Bacteria: Teicoplanin is particularly effective against gram-positive bacteria, which have a thick peptidoglycan cell wall. It is less effective against gram-negative bacteria because they have an outer membrane that acts as an additional barrier to the antibiotic.
  • Treatment of Resistant Infections: Teicoplanin is often used in cases of antibiotic-resistant infections, such as those caused by methicillin-resistant Staphylococcus aureus (MRSA) or other multidrug-resistant gram-positive bacteria. Its ability to disrupt cell wall synthesis makes it a valuable option when other antibiotics are ineffective.

Teicoplanin is administered intravenously (IV) or intramuscularly (IM) by healthcare professionals to ensure precise dosing and proper delivery to the site of infection. The choice to use Teicoplanin and the specific dosage depend on the type and severity of the infection, as well as the susceptibility of the bacteria causing it. Treatment should always be guided by a healthcare provider to ensure the most effective and appropriate use of the antibiotic.

Benefits of Teicoplanin Injection:

  • Effective Against Gram-Positive Bacteria: Teicoplanin is particularly effective against a wide range of Gram-positive bacteria, including staphylococci and streptococci, which cause various types of infections.
  • Treatment of Serious Infections: Teicoplanin is often used to treat severe or life-threatening infections such as methicillin-resistant Staphylococcus aureus (MRSA) infections, endocarditis, and bone infections.
  • Long-Lasting: It has a long half-life, which means it can be administered less frequently than some other antibiotics, simplifying the dosing schedule for patients.
  • Alternative to Vancomycin: Teicoplanin can be used as an alternative to vancomycin, especially in cases where patients may not tolerate vancomycin well or if the bacteria are resistant to vancomycin.

Side Effects of Teicoplanin Injection:

  • Allergic Reactions: Like many medications, teicoplanin can cause allergic reactions in some individuals. Symptoms may include rash, itching, swelling, severe dizziness, or difficulty breathing. Seek immediate medical attention if you experience any signs of an allergic reaction.
  • Kidney and Liver Problems: Teicoplanin can potentially affect kidney and liver function. Regular monitoring of kidney and liver function may be necessary during treatment.
  • Gastrointestinal Distress: Common side effects may include nausea, vomiting, diarrhea, or abdominal pain.
  • Thrombophlebitis: Teicoplanin injections can irritate the vein where they are administered, leading to thrombophlebitis (inflammation of the vein). It is essential to follow proper injection techniques to minimize this risk.
  • Blood Disorders: In rare cases, teicoplanin can affect blood cell counts, leading to conditions like thrombocytopenia (low platelet count) or leukopenia (low white blood cell count).
  • Skin Reactions: Skin reactions, such as redness, itching, or rash, can occur.
  • Hearing Impairment: In rare cases, teicoplanin has been associated with hearing impairment, especially in patients with preexisting hearing problems.

It’s crucial to take teicoplanin as prescribed by your healthcare provider and to report any unusual or severe side effects promptly. Your doctor will weigh the potential benefits of teicoplanin treatment against the potential risks and side effects based on your specific medical condition. Always follow your healthcare provider’s instructions and inform them of any allergies or other medications you are taking to minimize the risk of adverse reactions.

Frequently asked questions (FAQs) about Teicoplanin Injection:

  1. What is Teicoplanin Injection used for?

Teicoplanin Injection is an antibiotic medication primarily used to treat serious bacterial infections caused by Gram-positive bacteria, including methicillin-resistant Staphylococcus aureus (MRSA) infections, endocarditis, and bone infections.

  1. How is Teicoplanin administered?

Teicoplanin is typically administered intravenously (IV) or through intramuscular (IM) injection. The specific dosing and administration method will depend on the type and severity of the infection, as well as the patient’s condition.

  1. How often do I need to take Teicoplanin?

The dosing frequency of Teicoplanin can vary depending on the infection being treated. It may be given daily or on alternate days. Your healthcare provider will determine the appropriate dosing schedule for your condition.

  1. How long should I continue taking Teicoplanin?

The duration of Teicoplanin treatment depends on the type and severity of the infection. It is essential to complete the full course of antibiotics as prescribed by your healthcare provider, even if you start feeling better before the course is finished.

  1. What are the potential side effects of Teicoplanin Injection?

Common side effects may include gastrointestinal symptoms like nausea, vomiting, diarrhea, and abdominal pain. Other potential side effects include allergic reactions, kidney and liver problems, thrombophlebitis, blood disorders, skin reactions, and hearing impairment. It’s important to report any unusual or severe side effects to your healthcare provider.

  1. Can Teicoplanin be used during pregnancy and breastfeeding?

Teicoplanin should be used during pregnancy or breastfeeding only if the potential benefits outweigh the risks, and under the guidance of a healthcare professional. Your doctor will consider the individual circumstances and available alternatives.

  1. Can I drink alcohol while taking Teicoplanin?

It is generally advisable to avoid alcohol while taking Teicoplanin, as alcohol can interact with the medication and potentially increase the risk of side effects.

  1. Are there any drug interactions with Teicoplanin?

Teicoplanin can interact with certain medications, so it’s crucial to inform your healthcare provider about all the medications, supplements, and herbal products you are taking. They will assess potential interactions and adjust your treatment plan accordingly.

  1. Can I stop taking Teicoplanin if my symptoms improve?

No, you should not stop taking Teicoplanin without consulting your healthcare provider. Even if your symptoms improve, it’s important to complete the full course of antibiotics as prescribed to ensure the infection is fully treated and to prevent the development of antibiotic resistance.

  1. What should I do if I miss a dose of Teicoplanin?

If you miss a dose, contact your healthcare provider or healthcare facility immediately to discuss the best course of action. It may be necessary to reschedule the missed dose or adjust the treatment plan.

As Teicoplanin Injection Exporters; We can cater to export business queries from the following geographies. We are exporting our Teicoplanin Injection product in the Following Countries-

Russia and CIS Countries: Azerbaijan, Armenia, Belarus, Georgia, Kazakhstan, Kyrgyzstan, Moldova, Russia, Tajikistan, Turkmenistan, Uzbekistan and Ukraine

GCC/ Middle East Countries: Saudi Arabia, Yemen, Oman, Bahrain, UAE, Lebanon, Jordan, and Iraq.

African Countries: Nigeria, Tanzania, Sudan, Zambia, Benin, Angola, Liberia

Southeast Asia: Cambodia, Indonesia, Laos, Malaysia, Myanmar, Philippines, Singapore, Thailand, Vietnam, Brunei Darussalam

Other Asian Countries: Nepal, Myanmar, Malaysia, Cambodia, Bhutan, Sri Lanka, Mauritius

Teicoplanin Injection Regulatory Documents:

  • Certificate of Analysis (COA)
  • Method of Analysis (MOA)
  • Stability Data (Accelerated stability / Long-term stability / Zone 4b)
  • CTD Dossier / ACTD Dossiers / eCTD Dossiers
  • Certificate of Pharmaceuticals Product (COPP)
  • Free Sale Certificate (FSC)
Contact the most reliable manufacturer of Teicoplanin Injection, Taj Pharmaceuticals Limited, to get bulk quantities at a reasonable price.

To Place Orders:

Direct line: +91 8448 444 095 / WhatsApp +91 74 0000 9975 / 74 0000 9976
E-Mail: info@tajpharma.com 
Toll free: 1-800-222-434 / Toll free: 1-800-222-825
General EPA BX: +91 22 2637 4592 / +91 22 2637 4593
Fax No: +91 22 2634 1274

GENERIC NAME OF THE MEDICINAL PRODUCT:

A. Teicoplanin for Injection 200mg
B. Teicoplanin for Injection 400mg

QUALITATIVE AND QUANTITATIVE COMPOSITION:

1. Teicoplanin for Injection 200mg
a) Each vial contains:
Teicoplanin……….200mg
Excipients…………q.s.
b) This pack also contains:
One FFS ampule of Sterile Water for Injection USP…….10ml


2. Teicoplanin for Injection 400mg
a) Each vial contains:
Teicoplanin……….400mg
Excipients……………..q.s.
b) This pack also contains:
One FFS ampule of Sterile Water for Injection USP…….10ml

THERAPEUTIC INDICATIONS:

Teicoplanin is used in the treatment of severe bacterial infections in hospitalized patients. It treats infections of skin & soft tissues, blood, heart, bones and lungs (pneumonia). Teicoplanin is an antibiotic. It kills bacteria by preventing them from forming the bacterial protective covering (cell wall) which is needed for them to survive.

DIRECTION OF USE:

As sterile freeze-dried powder for Reconstitution with Sterile water for Injection 10ml.
Reconstituted solution should be administered in a suitable parental fluid prior to IV Infusion.
Reconstituted solution should be stored under refrigeration and solution stored for longer than 24 hours should be discarded.
Read enclosed leaflet for reconstitution & administration and for further information.

CAUTION & WARNING:

CAUTION: After reconstitution do not use in case any foreign particulate matter is observed. Do not use the solution & return for the replacement.
Use only after reading the directions on the pack insert.
Discard unused portion.
FLIP-OFF SEAL IS PROVIDED FOR TAMPER EVIDENCE.
WARNING:
-It is dangerous to take this preparation except in accordance with the medical advice.
-Not to be sold by retail without the prescription of a Registered Medical Practitioner.

STORAGE & DOSAGE:

STORAGE: Store below 25°C (77°F).
Protect from heat and moisture.
Do not freeze.
Keep all medicines out of reach of children.
DOSAGE: As directed by the Physician.